Product ID:ALCOHOL USP, ETHYL ALCOHOL, 200 PROOF
MSDS Date:01/01/1987
FSC:6505
NIIN:00-105-0000
MSDS Number: BJFMJ

Emergency Phone: 800-854-6813 /POISON CONTROL CTR/

Info Phone: 502-633-0650

Cage: 61305

Telephone: 502-633-0650

Cage: 61305

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 100%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IRRITATION OF THROAT. INGEST:CAN
CAUSE DEPRESSION OF CENTRAL NERVOUS SYSTEM. EYE:LIQUID OR VAPOR MAY
CAUSE IRRITATION. SKIN:MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INHAL:EXPOSURE TO OVER 1000 PPM MAY CAUSE
HEADACHE, DROWSINESS, AND LASSITUDE, LOSS OF APPETITE AND INABILITY
TO CONCENTRATE. INGEST:NAUSEA, VOMITING, DIARRHEA. SKIN:MAY CAUSE
DEFATTING OF SKIN ON PRO LONGED CONTACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:IF VICTIM IS CONSCIOUS AND ABLE TO SWALLOW,HAVE VICTIM
DRINK WATER OR MILK TO DILUTE.NEVER GIVE ANYTHING BY MOUTH IF
VICTIM IS UNCONSCIOUS.CALL MD OR CONTROL CTR IMMED.INHAL:IMMED
REMOVE VICTIM TO FRESH AIR.IF VICTIM HAS STOPPED BREATHING GIVE
ARTF RESP.GET MD IMMED.EYES OR SKIN:IMMED FLUSH W/PLENTY OF COOL
WATER.EYES SHOULD BE FLUSHED FOR AT LEAST 15 MIN.REMOVE&WASH CONTAM
CLOTHING.GET MD.

Flash Point Method:TCC
Flash Point:57.0F,13.9C
Lower Limits:3.3
Upper Limits:19
Extinguishing Media:USE DRY CHEMICAL, "ALCOHOL" FOAM, OR CARBON
DIOXIDE; WATER SHOULD BE USED TO KEEP FIRE-EXPOSED CONTAINERS COOL.
Fire Fighting Procedures:USE WATER SPRAY TO DISPERSE THE VAPORS AND TO
PROTECT MEN ATTEMPTING TO STOP LEAK.WATER SPRAY MAY BE USED TO
FLUSH SPILLS AWAY FROM EXPOS AND TO DILUTE SPILLS.
Unusual Fire/Explosion Hazard:FIREFIGHTERS SHOULD WEAR SCBA IN THE
POSITIVE PRESSURE MODE WITH A FULL FACEPIECE WHEN THERE IS A
POSSIBILITY OF EXPOSURE TO SMOKE,FUMES OR HAZARDOUS PRODUCTS.

Spill Release Procedures:WEAR APPROP RESP PROTECTION AND PROTECTIVE
CLOTHING.CONTAIN SPILLED MATERIAL.TRANSFER TO SECURE
CONTAINERS.WHERE NECESSARY,COLLECT USING ABSORBENT MEDIA.IN THE
EVENT OF AN UNCONTROLLED RELEASE,THE USE R SHOULD DETERMINE IF THE
RELEASE IF REPORTABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE. KEEP
DRUMS OR BOTTLES OF MATL AWAY FROM HEAT. MAINTAIN CLOSURE TO
PREVENT LEAKAGE. CONTAINER HAZARDOUS WHEN EMPTY.
Other Precautions:DETACHED OR OUTSIDE STORAGE IS PREFERRED.INSIDE
STORAGE SHOULD BE NFPA APPROVED FLAMMABLE LIQUID STORAGE ROOM OR
CABINET.ALL IGNITION SOURCES SHOULD BE ELIMINATED.ISOLATE FROM
OXIDIZERS,CHEMICALS CAPA BLE OF SPONT HEATING,IGNITION SOURCES.

Respiratory Protection:WHERE EXPOS IS LIKELY TO EXCEED CRITERIA,USE
NIOSH/MSHA APPROVED RESP PROTECTION EQUIP.RESP SHOULD BE SELECTED
BASED ON THE FORM AND CONCENTRATION OF CONTAMINANT IN AIR AND IN
ACCORDANCE WITH OSHA.
Ventilation:HANDLE IN THE PRESENCE OF ADEQUATE VENTILATION.
Protective Gloves:GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:F2
Boiling Pt:B.P. Text:173F,78C
Melt/Freeze Pt:M.P/F.P Text:-173F,-114C
Vapor Pres:44.6 @ 68F
Vapor Density:1.59
Spec Gravity:0.794 @ 60/60F
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR AND COLORLESS

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:CONTACT WITH ACETYL CHLORIDE MAY REACT
VIOLENTLY.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:ALL RECOVERED MATRL SHOULD BE
PACKAGED,LABELED,TRANSPORTED&DISPOSED OR RECLAIMED IN CONFORMANCE
W/APPLICABLE LAWS AND REGULATIONS AND CONFORMANCE WITH GOOD
ENGINEERING PRACTICES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.